MIL-EMBLA MILAB kondensator valgbar karakteristikk
|
EMBLA er bygget for å gjengi lyd så nær originalen som overhodet mulig. Med Milabs rektangulære store dual membran hode og variable polarmønster er den et naturlig valg for ethvert studio og opptakssituasjon. |
|
Støtdempet membranoppheng 48V fantommating |
| Frequency response | 20 - 20 000 Hz |
| Polar pattern (switchable) | Cardioid, Wide Cardioid, Hyper Cardioid, Figure -8, Omni |
| Max. SPL ( 1 % THD at 1 kHz) | 114 dB |
| Sensitivity at 1kHz | 20 mV / Pa ± 1 dB |
| A-weighted noise level( IEC 179-A) | 19 dB |
| Power supply | 40-52 V phantom |
| Current consumption | 4,5 mA |
| Output impedance | < 200 ohms |
| Minimum load impedance | 1 kohm |
| Connection | 3-pin XLR pin 1: earth ( Shield ) pin 2: plus ( Hot ) pin 3: minus ( Cold ) |
| Net weight | 360 g |
| Lenght | 198 mm |
| Diameter | 30/36 mm |